1/16 tungsten electrodes High Frequency Welding are perfect up to around 90 amplifiers, much above 90 amplifiers and you need 3/32. Above 200 amplifiers and you need a 1/8 tungsten.
Tig Welding Rod – 90 % of everything you will tig weld can be welded with 3 different tig supports. 308 for welding stainless, E70S2 – for welding light metal and 4130, and 4043 for welding metal. There are all types of supports for particular applications but these 3 supports will handle most of the tig projects you will do.
Tig Welding Technique – Hold the tig flash light like it was a first grade pencil with the ball of you part resting on the desk or something. Lean the flash light returning just about 10 stages and with the tip of the tungsten lifted about 1/4 inches off the metal, nod your welding headgear down and press the feet your pedal. Once you establish the arc, improve the warm by pressing the feet your pedal until your welding mess is about Four periods the width you are welding up to about 3/8 inches max. Try to keep the arc duration (distance between tip of electrode and puddle) to about the dimension the electrode you are using.
Now comes the process…to get an evenly rippled stack of dimes welding pellet, add item rod, stop, gradually shift the mess about 1/8 inches and stop, add item metal, stop, and so on, and so on.
If you do this strategy and stop tig welding strategy right, you get a consistent stack of dime pellet.
Easy right? But it requires a lot of exercise and chair time.
5 Tig Welding Tips -
Try to sustain an tip to mess distance of RF Welding no more than the electrode size.
